Vehicles
62 not categorized PORSCHE 996 REAR RUBBERCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.150PB100916 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$44.00
Make a selection 150PB100922 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$44.00
Make a selection 150TBF900 Replace worn-out original front control arm / wishbone bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. This is located at the front of the control arm / wishbone. The correct matching poly-graphite bushing for the rear of the control arm is part # 150tbr900 sold individually. 2 necessary per car.
$48.40
Make a selection 150PB100918 Replace worn-out original sway bar bushings with this longer lasting poly-graphite plastic bushing. Poly-graphite is higher density than OEM rubber, so suspension components will experience less deflection. It is specially formulated with a graphite lubricant to produce a bearing like action. We also recommend replacing the sway bar to ball pin bushing at the same time to save on labor costs, part # 90134378200 sold individually. 4 necessary per car. Please note: this fit's genuine rear sway bars only.
$44.00
Make a selection 19271423 The kw hls (hydraulic lift system) provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc. General Fitment911 TURBO/GT2 2007-09
$9,516.14
Make a selection 35271219 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 c4 05+ General Fitment911 2005-08
$11,311.64
Make a selection 35271224 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 GT3 & rs 07+ General Fitment911 GT3 2007-11
$11,481.74
Make a selection 35271419 Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 c4 05+ General Fitment911 2005-08
$13,201.64
Make a selection 35271424 Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 GT3 & rs 07+ General Fitment911 GT3 2007-11
$13,371.74
Make a selection 911561053652XW This is the rear outer section of the cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. It includes a pvc plastic rear window with a zipper like the original. If the window gets hazy simply unzip, remove and add a new window. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers are made for modern electric tops with stronger frames for the 911 and 964. Sonnenland high quality material was originally used by Porsche and other top...(choose a part on the right to read more) View/Change Diagram
From $1,058.20
Make a selection 90133300309B This rear spring plate is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. New OEM spec. (65 shore) rubber bushings are installed to make this a direct bolt on. Features: made from ¼ inch spring steel includes new OEM spec. (65 shore) rubber bushings made in Germany sold individually. Left or right-side fitment. 2 necessary per car.
$306.90
Make a selection 90133105900 Replace worn-out rear trailing arm bushings with this OEM bushing, made of rubber with a 65-shore hardness value. 65-shore is what was originally used in all of the OEM bushings, it is quiet and comfortable for street use with street suspension. If you are looking for something sportier, try our rs bushing set, made of rubber with an 85-shore hardness value, our part # FVD33105900 sold individually. 4 necessary per car. View/Change Diagram
From $25.50
Make a selection 91133300905 Our rear spring plate set is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. The adjustability allows for precise re-indexing of the torsion bar 1 ½ inches up or down. New OEM spec. (65 shore) rubber bushings are installed to make this a direct bolt on without the hassle of adding new bushings. Each plate is clearly marked for indexing purposes and includes complete installation instructions. Features: made from ¼ inch spring steel adjustment range of 1 ½ inches up or down includes new OEM spec. (65 shore) rubber bushings clearly marked for accurate installation and indexing made in Germany sold individually. 2 necessary per car. Plea...(choose a part on the right to read more) View/Change Diagram
From $273.90
Make a selection 91133300900BHD Bushings set with instructions:w/ 80-85 shore a hardness
$29.89
Make a selection 90133300309 This rear spring plate is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. New OEM spec. (65 shore) rubber bushings are installed to make this a direct bolt on. Features: made from ¼ inch spring steel includes new OEM spec. (65 shore) rubber bushings made in Germany sold individually. Left or right-side fitment. 2 necessary per car. View/Change Diagram
From $306.90
Make a selection 91442423902 This reproduction boot fits on the plastic cover of the shift console at the transmission and keeps dirt out of the bushings for extended life. It replaces the no longer available shift linkage boot for your side-shift 914 View/Change Diagram
From $21.00
Make a selection 911563051002EQ This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a pvc plastic rear window like the original. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion; increased fade resistance and the tighter woven layers are made for stronger frames. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. This would replace original part # 911 563 051 00 2xw made in Germany. Sold individually. 1 necessary per car.
$1,992.10
Make a selection 91455901510 This rubber buffer fits at the drivers rear of the rear trunk and cinches up the top when stowed away. critical to prevent top scratching and rattling. View/Change Diagram
From $19.50
Make a selection 91453100000 The 6 critical seals to keep the water out in one handy kit. when it rains, it pours, and we all know how leaky the 40 year old rubber on your 914 can get. replace the ones that matter most; the windshield frame seal, the vertical rollbar seals, and the targa side seals. General Fitment914 1970-76
$374.62
Make a selection 91433203500 This is a all new lobro made in italy rear cv axle boot kit. Its a great idea to replace the boot and the rest of the small parts all necessary after so many years of usage. Why not get the kit ready to go with the lobro grease the washer, 'c' clip, all ready to go for a new suspension job. This is a great part compared to the yellow bottom flange color cv axle boots since these rubber boots are a better quality than the competition. Why settle for cheap aftermarket cv axle boot kit and search for a quality grease when you can buy the kit and complete the job the right way the first time. get this great lobro italian made cv rear axle boot kit today~! Fits all rear left or right axle for Porsche 914-4 '70-...(choose a part on the right to read more) View/Change Diagram
From $7.59
Make a selection 94451204300 Rubber rear hatch seal. View/Change Diagram
From $89.65
Make a selection 95580138500 Known as: protective rubber roof rack front and rear View/Change Diagram
$48.95
Make a selection 944185072 Please specify year of car when ordering. General Fitment944 1989-91944 1985-88 944 1982-85
$587.79
Make a selection FVD33150003 Rear toe control arms - order in pairs only restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can't compensate enough when lowering your Porsche, leaving you stuck with as much as ½ of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.
$218.90
Make a selection 96433102200RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |